SERIES
Standard Cold Room
The series most widely used in storage rooms; for small and medium volumes.
- Capacity
- 0,5 – 40 kW
- Fin spacing
- 4 / 6 / 8 mm
- Refrigerants
- R404A · R507 · R22 · R134A · R407
This series
A member of the Evaporators family. The casing, the coil, the test pressure and the standards are shared with the family; what sets this series apart is where it is used. Dimensions and capacity are set by the model.
The whole Evaporators familyEvaporators — shared technical specifications
These values hold for every series in the family; they do not change from series to series.
- Heat exchanger
- Alüminyum kanatlı, bakır borulu
- Header
- Bakır; emiş ve basınç kontrol valfli
- Casing
- Elektrostatik toz boyalı galvanizli çelik sac
- Standard colour
- RAL 9016
- Fan motor
- IP44 / IP54 · izolasyon sınıfı B ve F
- Test pressure
- 34 bar
- Shipping
- Pozitif basınç altında
- Standards
- TS EN 328 · Eurovent
- Noise measurement
- EN 13487 · 3 m
- Warranty
- 1 yıl
Material options
- Epoxy-coated aluminium fin
- Fully epoxy-coated coil
- Copper fin
Defrost system
- Light defrost (SC1–SC2): electric heater on the heat exchanger.
- Heavy defrost (SC2–SC4): electric heaters on the heat exchanger and the drain tray.
- Option: drain line heater, hot gas defrost, water defrost.
Other series in the same family
-
Double-Discharge Ceiling Type
Distributes the air in two directions; in stores with long aisles it reduces the temperature difference between the racking.
-
Blast Freezer Evaporators
For rapid freezing tunnels; the wide fin spacing keeps the air moving even under frosting.
-
Ceiling Type
Gives capacity in low-ceilinged rooms without losing floor area.
-
Display Cabinet Coolers
Compact coils for the display cabinets in supermarket and butcher counters.
Model selection
This page describes the series platform; the model number is set by the capacity. There are two ways — read the table yourself, or enter your conditions into the selection tool. If you are not sure, send us the dimensions and we will run the calculation together.
Catalogue
The model list and the capacity and dimension tables are in this family's catalogue. You can use the table for the selection, or send us the dimensions and we will run the calculation together.
PDF · 1,7 MB · 16 pages
Selection tool
Enter the capacity, the ambient temperature and the regime; it lists the matching models. It is a separate application and opens in a new tab.
planer.proselector.net
Are you making a selection from this series?
Send us the room volume, the operating temperature and the refrigerant, and we will prepare the right model and circuit layout.